PET matte release film, also known as matte release film. It is based on the original PET transparent film, by adjusting the raw material formula appropriately, adding silicon dioxide, and coating the surface of the film with silicon or fluorine, to make the release film non stick or slightly stick when in contact with specific materials under limited conditions. TPXPPC flexible circuit boards, die-cutting industry, outer packaging, automotive insulation, etc. are all the main uses of matte release films. The method of release film: PET release film, also known as heat transfer film, peel film, insulation film, slip film, Tiana paper, silicone oil film, anti mucosa, silicone oil release paper, silicone oil paper, mask film, PET release film, also known as PET transfer film. It mainly

PTFE is prone to internal cooling and stress relaxation under stress and continuous high temperature, so it is generally used for low voltage, medium temperature, strong etching and substances that do not allow environmental pollution, such as strong alkali, strong acid, Halogen lamp, drugs, etc. The safety application temperature is 150 ℃, and the working pressure is below 1MPa. Although polytetrafluoroethylene has higher compressive strength, its application temperature does not exceed 200 ℃ and its corrosion resistance is reduced. The working pressure of PTFE gaskets generally does not exceed 2MPa. Due to the increase in temperature, the raw materials experience stress relaxation, resulting in a significant decrease in the sealing working pressure. Even without raising the temperature, with the increase of time

Polytetrafluoroethylene film is formed by pressing and sintering cylindrical billets, cutting them into thin films by machine tools, and then rolling them. According to different processing methods, it can be divided into three types: directional membrane, semi directional membrane, and non directional membrane. At present, polytetrafluoroethylene film products include porous membranes, microfiltration membranes, color membranes, etc. 1. PTFE color film is suitable for insulation of electrical instruments or wires, and has color distinguishing marks. It is a new type of C-class insulation material with excellent comprehensive performance, and is one of the indispensable and important materials in the radio industry, aviation industry, and cutting-edge technology. PTFE film is generally made of suspended PTFE resin with a particle diameter of 150

Many electronic products or components used inside need to be packaged with anti-static release films. Nowadays, many lighting fixtures use release films for packaging. In addition, there are many places where release films can be seen. Today, the editor of release film manufacturers will tell you where anti-static release films are mainly used. Nowadays, various electronic products are suitable for using release films. In the past, most of them were non anti-static, but the protection of electronic products is very important. Nowadays, electronic products are much more advanced, and the type of release film used in the past cannot meet the needs of today's electronic products because electronic products are becoming more and more popular

Fluorine release membrane, also known as fluoroplastic release membrane. This film is made of fluorinated organic silicon coated on the surface and has the characteristic of high temperature resistance. Regarding silicone tape, it has excellent peeling function. Fluorine release film is primarily used in high-temperature tape and gold finger composite die-cutting processes. Application and characteristics of anti-static release film: In the era of information technology, electromagnetic waves can cause varying degrees of disturbance to unshielded sensitive electronic components, circuit boards, communication equipment, etc., forming data distortion and communication disorder. The static electricity generated by electromagnetic induction and conflicts can cause high voltage to various sensitive components, instruments, and certain chemical products, such as packaging films due to the accumulation of static electricity

When we see this word, many may not know it, but as we accumulate over time, our knowledge will be far away. Since we don't know, let's take a look at how the editor of the fluorine release film manufacturer at Ruichangxing Company introduced it. Fluorine release film, also known as fluoroplastic release film, is a type of release agent coated on the surface of PET as the substrate. Qualified fluorine release film has a flat and smooth surface, uniform coating, and no defects such as particles or bubbles. This product has advantages such as excellent physical and mechanical properties, small thickness tolerance, high transparency, low thermal shrinkage, and good flexibility. Suitable for high-temperature silicone pressure-sensitive tape composite die-cutting and punching, easy to peel off after use

PET release film plays an important role and effect in the daily production of Double-sided tape. The editor of the release film manufacturer of Ruichangxing Company shares relevant content with everyone on the role of PET release film in production. PET release film plays an important role in the production of double-sided tape. If die-cutting double-sided tape needs to use release film, the key features of release film are coating uniformity, high residual continuity, flatness and high cleanliness. 1. Cleanliness: There are several parts that need to be controlled to improve product cleanliness. One is the base film cleaning and dust removal device, the second is the setting of a dust-free workshop, and the second is the dust removal setting of the cutting equipment. Improving product cleanliness can also be achieved

We all know that fluorine release membranes are widely used, so what is fluorine release membrane? The fluorine release film of Ruichangxing Company is made by coating fluorine release agent on the polyester film substrate. It is specially designed for bonding with silicone pressure sensitive adhesives and other materials. It not only provides stable easy release force, but also maintains good subsequent adhesion strength. The fluorine release membrane is made of polyethylene terephthalate (PET) as the substrate, and the surface of the product is coated with 0.2um~0.6um fluorine release substance. The surface of the film is flat and smooth, evenly coated, and free from defects such as wrinkles, tears, particles, bubbles, and pinholes. Excellent physical and mechanical properties

In terms of the selection of release film, it should be considered in terms of cost, product quality, and production process characteristics. Regarding the selection of release film, let's take a look with the editor of Ruichangxing. 1. Cost: There is a significant difference between domestic and imported release membranes, and generally speaking, domestic beer is not very good. Especially in the preparation of 3M adhesive tape and Nippon adhesive tape, there are often cases where the surface is foggy or the release degree is too low, which cannot tear the release film and product well. It's just that domestic products are definitely cheaper than imported ones. And there is a relatively large price ratio. If considering that the company's products are used for export, it is better to recommend using imported ones

In the process of house decoration, people like to use PET release film. This film can improve stability after application and also meet the standard requirements of modern decoration work. Therefore, the demand for this product has been continuously increasing in recent years. Nowadays, people are becoming more curious about the application characteristics of products. What are the unique advantages of using PET release membranes? 1、 The use of PET release film can achieve good anti-static effects. Nowadays, technology is developing rapidly, and people's lives are becoming increasingly inseparable from technology. Moreover, the internet has begun to participate in all aspects of life and work, so people's lives

Fluorine release film, also known as fluoroplastic release film, is a type of release agent coated on the surface of PET as the substrate. Qualified fluorine release film has a flat and smooth surface, uniform coating, and no defects such as particles or bubbles. This product has advantages such as excellent physical and mechanical properties, small thickness tolerance, high transparency, low thermal shrinkage, and good flexibility. Suitable for high-temperature silicone pressure-sensitive tape composite die-cutting and punching, easy to peel off after use. The application principle of fluorine release film is the same as that of release film, mainly playing an anti sticking role. However, unlike silicone oil release film, fluorine exists in the form of fluoride inside, and most adhesive tapes are made of substrate

PET release film is now widely used in production, and the market demand is also increasing. Using PET as the substrate for the release film, and then coating it with a layer of silicone oil, it is often referred to as a silicone oil film. PET release films with reliable quality can be divided into different types in actual manufacturing, such as cold and hot tearing, smooth and matte surface, due to different processes. Let's take a closer look at the excellent properties of PET release membranes. 1、 When using PET release film, the backing paper on the back needs to be removed first. However, due to the use of advanced processing technologies such as plasma treatment and coating during manufacturing